| View previous topic :: View next topic |
| Author |
Message |
JoshuaWarren
Joined: 10 Oct 2007
Posts: 717
Score: 8372
Location: Good Hope, Georgia
|
 Posted: Mon Sep 22, 2008 10:29 am Post subject: Rear Bodywork |
 |
|
Are we going to need rear bodywork for the clone next year?
_________________
"Porkchop Racing"
Joshua Warren
#75
Clone Senior
Last edited by JoshuaWarren on Mon Sep 22, 2008 11:57 am; edited 1 time in total |
|
| Back to top |
|
 |
Michael Jackson
Joined: 11 Apr 2006
Posts: 513
Score: 5286
Location: Lithia Springs Ga.
|
| Posted: Mon Sep 22, 2008 10:41 am Post subject: |
|
|
| You should already have a bumper on your kart. As far as a WKA mandated bumper for next year which I've been told is bigger not for now. The Clones are not listed in WKA. John W. and I discussed it recently and for now It won't be mandatory but if you want to put one on if you can even find one for your kart it is acceptable. After the election of new board members and president all of this could change. |
|
| Back to top |
|
|
John Wehrheim
Senior 2 Cycle Director
Joined: 18 May 2006
Posts: 2233
Score: 29748
Location: Norcross
|
| Posted: Mon Sep 22, 2008 11:15 am Post subject: |
|
|
I hope the board does not mandate the full width bumpers if the Clone drivers do not want them.
_________________
John
Board of Directors
Sr. 2 Cycle Director |
|
| Back to top |
|
|
Mike Pugh
Junior 4 Cycle Director
Joined: 15 May 2006
Posts: 830
Score: 28514
Location: Stockbridge ga
|
| Posted: Mon Sep 22, 2008 11:49 am Post subject: |
|
|
Weather it is mandatory or not I have used one for years.
I love the looped bumpers and it makes you allot safer.
Rick custom made mine for only $60.
Well worth it.
_________________
Rippin Racing
Powered by Revvv... |
|
| Back to top |
|
|
JoshuaWarren
Joined: 10 Oct 2007
Posts: 717
Score: 8372
Location: Good Hope, Georgia
|
|
| Back to top |
|
|
Mike Pugh
Junior 4 Cycle Director
Joined: 15 May 2006
Posts: 830
Score: 28514
Location: Stockbridge ga
|
| Posted: Mon Sep 22, 2008 12:43 pm Post subject: |
|
|
I'm so confused. 
Why would you need that?
_________________
Rippin Racing
Powered by Revvv... |
|
| Back to top |
|
|
JoshuaWarren
Joined: 10 Oct 2007
Posts: 717
Score: 8372
Location: Good Hope, Georgia
|
| Posted: Mon Sep 22, 2008 2:51 pm Post subject: |
|
|
I don't know.
I was just wondering
_________________
"Porkchop Racing"
Joshua Warren
#75
Clone Senior |
|
| Back to top |
|
|
metzgerov
Joined: 03 May 2007
Posts: 162
Score: 1620
Location: Atlanta
|
| Posted: Mon Sep 22, 2008 3:14 pm Post subject: |
|
|
Yeah I dont want that...
_________________
Shane Metzger |
|
| Back to top |
|
|
Michael Jackson
Joined: 11 Apr 2006
Posts: 513
Score: 5286
Location: Lithia Springs Ga.
|
| Posted: Tue Sep 23, 2008 10:05 am Post subject: |
|
|
| Correct me but that is required on Tags and Rotax but not sure. It is @$125 or more and is not suitable for our Clones. After last weekend I would like to put a rear bumber like Gatormoto karts have but mine would have to be special built due to my narrow frame rail spacing. Most of us use a small loop but it leaves the rear tires exposed and sometimes we climb them in close quarters. |
|
| Back to top |
|
|
Ihor Bilyy
Site Admin
Joined: 10 Apr 2006
Posts: 1745
Score: 26194
Location: Canton, GA
|
| Posted: Tue Sep 23, 2008 10:08 am Post subject: |
|
|
TS Racing is selling wide loops by WKA standards. I bought one for my road racing last year and didn't use it. You can mount it on your small rear bumper with couple of clamps.
I can bring mine to the track next race if anybody want to try it. |
|
| Back to top |
|
|
|
